ADLINK TECHNOLOGY Industrial Partner

cPCI-6780V - Adlink cPCI-6780V CPU board 6U cPCI High Performance FSB133...

larger image

Request Quote
For Price
Part Number:
cPCI-6780V
Model Number:
cPCI-6780V
Make:
ADLINK
Lead Time:
Available
Qty In Stock:
Available

Adlink cPCI-6780V CPU board 6U cPCI High Performance FSB133 All-in-one CPU module with on-chip AGP-VGA display Simple Type: CPU Board

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 4 USB ports, 4 COM ports and 2 parallel ports supported
  • Built-in housing for 2.5" low profile HDD
  • CompactFlash type-II socket via removable daughter board
  • Intel pre-boot execution environment (PXE) for remote boot
  • On-board AGP 2x VGA with 4MB display cache by built-in Intel 815E chipset (CPCI-6780 and CPCI-6780-01)
  • PICMG 2.0 CompactPCI Specification R2.1 Compliant
  • Rear I/O configuration supported (CPCI-6780RV/RS rear I/O transition modules)
  • Socket370 66/100/133MHz FSB Celeron/Pentium III up to 1.3GHz
  • Standard 6U form with 2-slot (8HP) width
  • Three 168-pin DIMM sockets support up to 512MB SDRAM, PC-100/PC-133 supported
  • Triple 10BaseT/100BaseTX Ethernet
  • Ultra-II Wide SCSI with LSI SYM53C895 chipset supported

Specifications

    General
  • BIOS: Award BIOS
  • Cache: 256KB for Pentium III (100/133MHz); 128K for Celeron (66/100MHz)
  • Certification: CE, FCC, HALT (temperature and vibration stress)
  • Chipset: Intel 815E B-stepping with ICH2 chipsets
  • CPU: Socket370 FC-PGA socket supports Intel Celeron/Pentium III up to 1.3GHz
  • Display: (CPCI-6780 and CPCI-6780-01) 1600X1200 resoluton, supports VGA rear I/O
  • Display: (CPCI-6780 and CPCI-6780-01) AGP 2X, ACPI and VESA compliant
  • Display: (CPCI-6780 and CPCI-6780-01) Intel 815E build-in hyper-pipelined architecture 3D graphics engine
  • Display: (CPCI-6780 and CPCI-6780-01) On-board 4MB display cache
  • Display: (CPCI-6780 and CPCI-6780-01) Supports display memory up to 10MB(by sharing)
  • FDD Interface: One FDD interface by J3 rear I/O supports two floppy frives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB.) another 34-pin FDD interface on rear I/O transition module
  • Flash Disk Interface: CompactFlash type-II socket on front CPU module by removable transition daughter board
  • Flash Disk Interface: DiskOnModule by 40-pin IDE port of rear I/O transition module
  • Flash Disk Interface: On-board housing for 2.5" flash diskon front CPU module
  • Front Panel LEDs and Switch: Power status/IDE activity/LAN/SCSI/LVD/SE LED indicators and system reset switch
  • FSB: 66/100/133MHz
  • Hardware Monitoring: Winbond W83782D built-in W83627HF, monitors CPU temperatures/fan/system temperatures/DC Voltages
  • IDE Interface: One 44-pin (primary) EIDE connector on front CPU module, supports on-board 2.5" notebook size HDD or flash disk. Two 40-pin EIDE conectors on rear transition module, PIO Mode3/4 and Ultra DMA/33 supported
  • LAN: Two Intel 82559 chipsets with two RJ-45 LAN ports on front CPU module, 10BaseT/100BaseTX Ethernet (Another LAN port on rear I/O transition module with ICH2 controller)
  • Mechanical: 6U, 8HP wide with 233mm X 160mm X 40.6mm (9.17" X 6.30" X 1.60"), including 2.5" HDD
  • Memory: Three 168-pin DIMM sockets support up to 512MB un-buffered SDRAM, PC-100/133 supported
  • Operating Temperature: 0 to 60 C (32 to 140 F)
  • Parallel Port: Two Bi-directional SPP/EPP/ECP modes parallel ports (Primary port on front CPU module, secondary port on rear transition module)
  • SCSI: (CPCI-6780-01/02 and CPCI6780RS rear I/O module are required) LSI (SYMBIOS) 53C859 Ultra II Wide SCSI controller featuring LVD by J4 rear I/O
  • Serial Ports: Two 16C550 UARTs compatible RS-232 COM ports on front CPU module. (Expendable one 16C550 UARTs compatible one RS-232 and one RS-232/422/485 selectable serial ports by using of rear transition module)
  • Storage Temperature:: -40 to 80 C
  • Super I/O: Winbond W83627HF (or compatible)
  • USB Interface: Four USB ports, two ports on front CPU module, another two ports on rear I/O transition module. (USB Specification Rev. 1.1 compliant)
  • Watch-dog Timer: Programmable I/O port 2Eh and 2Fh to configure watch-dog timer, 1~255 min./sec. timer

 

Applications

  • None Available

Aliases

  • None Available