cPCI-7433 - Adlink cPCI-7433 I/O Module. 64-CH Isolated Digital Input Card Simple...
- Part Number:
- cPCI-7433
- Model Number:
- cPCI-7433
- Make:
- ADLINK
- Lead Time:
- Available
- Qty In Stock:
- Available
Adlink cPCI-7433 I/O Module. 64-CH Isolated Digital Input Card Simple Type: I/O Module
The ADLINK cPCI-7433 card is a 64-CH high-density digital input card. They provide a robust 5,000 VRMS isolation protection which is suitable for most industrial applications. The wide input range of the cPCI-7433 series makes it easy to sense the status of external devices. The cPCI-7433 card also provides two interrupt sources on digital input channels, which are easily user configurable. It uses ASIC PCI controller to interface the board to the PCI bus. The ASIC fully implement the PCI local bus specification Rev 2.0. All bus relative configurations, such as base memory and interrupt assignment, are automatically controlled by BIOS software. It does not need any user interaction and pre-study for the configurations. This removes the burden of searching for a conflict-free configuration, which can be very time consuming and difficult with some other bus standards.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 3U Eurocard form factor, CompactPCI compliant (PICMG 2.0 R2.1)
- 64-CH isolated digital inputs
- Isolated input voltage up to 24 V
- Isolation Voltage: 5000 VRMS
- Non-polarity digital input range
- Sink current up to 500mA on each isolated output
- Two external interrupt sources
Specifications
- Data Transfers: programmed I/O
- Digital Logic Levels: 0-24 V, non-polarity. Input high voltage: 5-24 V, Input low voltage: 0-1.5 V
- Dimensions: 160 mm x 100 mm (not including connectors)
- I/O Connector: 100-pin SCSI-II female
- Input Resistance: 2.4 k? @ 0.5 W
- Interrupt Sources: digital input channel 0 and 1
- Isolation Voltage: 5000 VRMS
- Maximum Input Range (non-polarity): 24 V
- Number of Channels: 64
- Operating Temperature: 0 to 60°C
- Power Requirements: 500 mA typical
- Relative Humidity: 5 to 95%, noncondensing
- Storage Temperature: -20 to 80°C
Applications
- None Available
Aliases
- None Available
