CPCI-3700A-2S/P850/M128/H40G - Adlink cPCI-3700A-2S/P850/M128/H40G CPU Board with 2-slot version, Pentium III/850, 128MB RAM, 40GB HDD, cPCI-R3700A

cPCI-3700A-2S/P850/M128/H40G - Adlink cPCI-3700A-2S/P850/M128/H40G CPU Board with 2-slot version, Pentium III/850, 128MB...

Adlink cPCI-3700A-2S/P850/M128/H40G CPU Board with 2-slot version, Pentium III/850, 128MB RAM, 40GB HDD, cPCI-R3700A Simple Type: CPU Board

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

Backplane I/O (rear I/O): COM2 (J2: RS-232/422/485), LCD (18/24-bit TFT)
Certificate or Test: CE, FCC class A, HALT
Chip: Award 2Mb flash memory
Chipset: Intel 440BX
CompactPCI Bus: 32-bit/33MHz, supports 7 bus-mastering devices
CPU: Intel SKT-370 FC-PGA Pentium III (up to 850MHz) with 256K on-die L2 cache or Celeron (up to 733MHz) with 128K on-die L2 cache
Dimensions: 100mm x 160mm (L x W), 2 or 3 slots wide
Display: SMI-721 AGP-2X VGA/LCD with 4MB VRAM
Ethernet: Single 10/100Mbps Ethernet by Intel 82559, RJ-45 connector
Features: Supports Intel PXE pre-boot on Ethernet
Floppy: Built-in slim type floppy module (3-slot version only)
Form Factor: 3U CompactPCI
Front Panel I/Os: PS2 KB, PS2 MS, VGA, LAN, USB x 2, LPT (mini port), COM1 (RS-232)
FSB: 100MHz
Hardware Monitoring: Monitoring CPU temperature, FAN speed, system temperature, Vcore and DC voltages
IDE: UDMA-33, dual channels, 44-pin connector, built-in 2.5" ATA HDD housing
Measured Power Consumption: 5.7A @ +5V, 3.6A @ +3.3V, 150mA @ +12V, installed with Pentium III 850MHz CPU and 256MB RAM, without HDD
Operating Temp.: 0 to 60°C (inside-chassis temp, external air-flow required)
RAM: One 144-pin SO-DIMM socket, up to 256MB SDRAM
Shock: 15G peak-to-peak, 11ms duration, non-operation
Standards: PICMG 2.0 R3.0, PICMG 2.1 Hot Swap R2.0
Storage Temp: -20 to 80°C
USB: USB 1.1, dual ports on front panel
Vibration: Non-operation
Watchdog Timer: 1-255 sec or 1-255 min software programmable. Generate NMI or system reset.