ADLINK TECHNOLOGY Industrial Partner

cPCI-3720A/P82 - Adlink cPCI-3720A/P82 CPU Board with Low Power Pentium III 850MHz...

larger image

Request Quote
For Price
Part Number:
cPCI-3720A/P82
Model Number:
cPCI-3720A/P82
Make:
ADLINK
Lead Time:
Available
Qty In Stock:
Available

Adlink cPCI-3720A/P82 CPU Board with Low Power Pentium III 850MHz 3U cPCI, active heat-sink, 1-slot width Simple Type: CPU Board

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • Dual 10/100Mbps Ethernet ports by Intel 82559 controller
  • Dual slot extension for 2.5" HDD housing and floppy connection
  • One 144-pin SO-DIMM socket, up to 256MB RAM
  • Passive heat-sink design with low power BGA2 Pentium III or Celeron CPU
  • Rear I/O supports LAN, COM, USB, LPT, and KB/MS
  • Single slot wide base board with CF socket
  • USB x 2, COM x 2, LPT x 1, PS/2 x 1, IDE x 1

Specifications

    General
  • Backplane I/O (rear I/O): COM1 (RS-232/422/485), COM2, LPT, LAN2, KB, MS, USB2
  • Chip: Award 2Mb flash memory
  • Chipset: Intel 440MX
  • CompactPCI Bus: 32-bit/33MHz, supports 7 bus-mastering devices PCI to PCI bridge: TI PCI2050
  • Compliance: CE, FCC Class A, HALT
  • Consumption: Pentium III 700MHz CPU, 256MB RAM, 2.5" ATA HDD, and cPCI-8217
  • CPU: Intel BGA2 mobile Pentium III 700/850MHz with 256K on-die L2 cache or mobile Celeron 400MHz with 128K on-die L2 cache
  • Dimensions: 100mm x 160mm (L x W), 1 or 2 slots wide
  • Ethernet: Dual 10/100Mbps Ethernet ports by Intel 82559, RJ-45 connector
  • Features: Remote Console
  • Floppy: Standard 34-pin connector on front panel in 2-slot version, optional add-on slim type floppy module
  • Form Factor: 3U CompactPCI
  • Front Panel I/Os: PS2 KB & MS, LAN1, LAN2, USB1, COM2 (RJ-45)
  • FSB: 100MHz
  • Hardware Monitoring: Monitors CPU temperature, fan speed, system temperature, Vcore and DC voltages
  • IDE: UDMA-33, single channel, with CF socket and 44-pin connector, built-in 2.5" ATA HDD housing in 2-slot version
  • Measured Power: 2.8A @ +5V, 2.5A @ +3.3V, 150mA @ +12V (peak value), installed with LP
  • Operating Temp.: 0 to 50°C (internal chassis temp, external air-flow required)
  • Other Features: Self-hot-swap support
  • RAM: One 144-pin SO-DIMM socket, up to 256MB SDRAM
  • Shock: 15G peak-to-peak, 11ms duration, non-operation
  • Standards: PICMG 2.0 R3.0, PICMG 2.1 Hot Swap R2.0
  • Storage Temp.: -20 to 80°C
  • Support Operating: Compatible with Microsoft Windows 98SE, Windows ME, Windows XP,
  • Systems Windows: NT, Windows 2000, Red Hat 7.1, 7.2, Novell, QNX, SCO UNIX, MontaVista Linux Carrier Grade Edition, and VxWorks 5.5 (The device drivers for Windows are included on the ADLINK CD. For VxWorks BSP, please contact ADLINK.)
  • USB: USB 1.1, one on front panel, one via rear I/O
  • Vibration: Non-operation
  • Watchdog Timer: 1-255 sec or 1-255 min software programmable, generates system reset Watchdog timer status LED

 

Applications

  • None Available

Aliases

  • None Available