cPCI-6760D/P8 - 6U cPCI Single Slot Low Power Pentium-III-850 System Host CPU...
Request Quote
For Price
- Part Number:
- cPCI-6760D/P8
- Model Number:
- cPCI-6760D/P8
- Make:
- ADLINK
- Lead Time:
- Available
- Qty In Stock:
- Available
6U cPCI Single Slot Low Power Pentium-III-850 System Host CPU Module with VGA, Dual LAN, PMC Slot and DB-6760CF Simple Type: CPU Board
The cPCI-6760D series products comply PICMG 2.0 Rev. 3.0 CompactPCI specification with 6U single-slot (4 TE/HP) form factor. cPCI-6760D series products support both front panel I/O and rear panel I/O. It is not necessary to use the rear board if the application just requires only front panel I/O wiring or special backplane wiring. The front board (the CPU module) and the rear board (the rear I/O transition module, RTM) are sold separately. The standard models cPCI-6760D/P7 and cPCI-6760D/P8 are front boards. And the standard models cPCI-R6760D and cPCI-R6760S are rear boards.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Build-in housing for 2.5” low profile HDD
- Design for low power or mobile BGA2 Pentium-III CPU running at FSB 100MHz
- On-board highperformance AGP 2x VGA display output by SMI SM721 controller
- PICMG 2.0 CompactPCI Specification R.3.0 Compliant
- PICMG 2.1 CompactPCI Hot Swap Specification R1.0 Compliant
- PICMG 2.7 CompactPCI Dual System Bus specification R1.0 compliant
- Self-hot-swap status indication
- Standard 6U form factor, 1-slot (4TE/HP) width
- Supports 14 bus-master PCI devices on CompactPCI bus peripheral slots (not available with cPCI-R6760S)
- Supports CompactFlash type-II socket via removable daughter board
- Supports external Ultra-160 SCSI interface (only available when collocating with cPCI-R6760S)
- Supports Intel pre-boot execution environment (PXE) for boot from LAN
- Supports rear I/O configuration
- Supports remote console on Serial ports
- Supports self-hot-swap operation by soft triggering system power off
- Supports up to 2 USB ports, 2 serial port, 1 parallel port
- Supports up to dual 10/100Mb Ethernet ports (up to four 10/100Mb Ethernet ports when collocated with cPCI-R6760S)
- Two 144-pin SO-DIMM socket supports up to 512MB PC-100 SD-RAM with optional ECC support
- WDT status indication
Specifications
- BIOS: Award 2Mb flash memory
- Chipset: 440BX
- CompactPCI Standards: PICMG 2.0 R3.0; PICMG 2.1 Hot Swap R2.0; PICMG 2.7 Dual System Slot R1.0
- cPCI Bus Interface: 32-bit/33MHz, support 14 bus-mastering devices, Dual TI PCI2050 PCI to PCI bridge
- CPU/Cache: Intel BGA2 mobile Pentium-III up to 850MHz with 256K on-die L2 cache
- Dimensions: 233.35mm x 160mm
- Flash Disk: Flash2000 2.5" flash drive or CF Card by removable adaptor
- Floppy: Standard 34-pin connector on RTM
- Form Factor: 6U cPCI (233.33x160mm), 1 slots (4HP) wide
- Front Side Bus Speed: 100MHz
- Humidity: 5 to 95% non-condensed
- IDE: UDMA-33, dual channels; built-in 2.5" ATA HDD housing on front board
- LAN: 10/100Mbps Ethernet by Intel 82559: dual ports on front board and additional dual ports on cPCI-R6760S rear board
- Operating Temperature: 0 to 60C
- RAM: Two 144-pin SO-DIMM sockets, up to 512MB SDRAM with optional on-board ECC support
- SCSI: LSI 53C1000R
- Storage Temperature: -20 to 80C
- USB: USB 1.1, 2 ports (1 for front, 1 for rear)
- VGA: SMI-721 AGP-2X VGA with 4MB VRAM
Applications
- None Available
Aliases
- None Available